Electronic RS485 Speed Gate Access Control Pedestrian Passing Entrance
Electronic Security Entrance Solution Speed Barrier Turnstile Gate With Access Control System For Pedestrian Passing
Introduction:
Automatic speed barrier turnstile gate ---is intelligent passage management equipment researched, developed and produced by our company.The equipment is integrated with delicate mechanical transmission, microprocessor control, and various read/write techniques. It can be used for intelligent control and management of the passage after equipped with different read/write devices.
The outline of the product is formed after bending the stainless steel plate. The shape is featured as pleasing appearance, good looking, stainless and durable. The system is provided with a standard electric interface and is easily integrated into the equipment with read/write facilities such as magnetic card, bar code card, ID card and IC card. As a result, an orderly and civilized passage is provided for the personnel in and out, and illegal personnel can be barred. At the same time, a special fire control interface is equipped in the system to meet the requirement of fire control passage, so that a rapid down rod control may be realized in emergency for diverting passengers.
Function:
1. It has a variety of working modes, which can be used for two-way card swiping in and out, and can be swiped on one side, prohibited or free on the other.
2. SS304 stainless steel, the whole body thickness is 2.0mm and luxury cylindrical design, high-grade temperated glass wing.
3. Automatic high-speed servo cylindrical speed pass door special movement, integrated design, stable performance.
4. Anti-collision self-reset, free passage of power, meet fire protection requirements.
5. Smart card card opening, scanning code opening, face recognition opening and other various opening methods are optional.
6. Optional card reader: Rfid card ,fingerprint scanner ,face machine ,Bar code, QR code ,card collection ,intercom system ,remote control and so on.
7. Access control system ,Ticketing system ,consumption system
8. Standard/customize housing design (ODM/OEM)
9. Optional entrance width(500-950mm) ,glass door size, operation speed
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet |
STANDARD FEATURES & FUNCTIONS:
-
(1). Operation model: Both directions can be set as controlled mode or free mode.
-
(2). NO mode & NC mode can be switched over by users easily & freely.
-
(3). Tailgating-detection function.
-
(4). Intruding-alarm function.
-
(5). Delayed reset automatically function.
-
(6). Anti-pinch function: protection against finger entrapment and personal injury.
-
(7). Emergency-escape function: the gates will open automatically by pressing the emergency button which can be remote-controlled whether the power is on or off.
-
(8). With interface of relay switch (the dry contact signal or +12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms, driving current ≥ 10mA), compatible with all kinds of access controllers.
-
(9). Equipped with free control software for machine interface & control command SDK.
Product Tags:
|
|
Electronic RS485 Speed Gate Access Control Pedestrian Passing Entrance Images
|
